德国PTL转盘 P17.47转盘防水测试仪 进口转盘试验仪

德国PTL转盘     P17.47转盘防水测试仪  进口转盘试验仪

PTL 转盘用于转动样本来确定防水
参照标准：
IEC 60335-1 / 1991-04 &15.1.1, 
IEC 60529 / 1989-11 &14.1 Table VIII Fig. 4, 
IEC 60598-1 / 1996-11 ?9.2.4 and & 9.2.5 Fig. 7, IEC 60947-1 / 1988 &C.8 Fig. C.4, 
EN 60529 / 1991 & 14.1 Table VIII Fig. 4, 
DIN 40 050 Part 9 / 1993-05 & 7.4 Table 8 Fig. 4, VDE 0470 Part 1 / 1992-11 &14.1 Table 8 Fig. 4 
 
 
Standard Outfit: 
1    tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above    floor approx. 220 mm, 
1    frame with AC geared motor, with additional gear reduction to 1 + 0,1 rpm, with 4 height adjustable caster wheels, 2 of them lockable. 
 
Design: tabletop with apron of aluminum, frame of steel hot-dip galvanized and papyrus white structure varnished, for connection to 230 V 50 Hz (other voltages on request), including a 3 m long hard wearing connection cable with waterproof CEE-plug, 
　table                carrying            Article
diameter:                capacity:             No.:
　730 mm               150 kg             P 17.37
　850 mm               150 kg             P 17.38
 1050 mm               150 kg             P 17.39
 
Additional Outfit: 
 
PTL Swivel Accessory Unit 
to change over from rotatory operation to swiveling operation  with  reverse  of  direction after approx. 350? absolutely necessary for specimens with connected cable,                                                        Article No.: P 17.44
Attachment : 
 
PTL Telescope Support 
for fitting on a turntable, to hold the specimens 
 
Standard Outfit : 
1  tubular stand, with mounting flange, 
2  telescopic tubes, to clamp by tommy screws, 
1  support grid, 270 mm x 180 mm, ±30 ° inclinable, to clamp by a tommy screw. 
 
Design: all parts of stainless steel (material 1.4301 or 1.4305), screws of stainless steel, height of support grid above tabletop adjustable - unless otherwise agreed upon - from approx. 600 mm to 1200 mm, carrying capacity maximally 50 kg,    
                                                     Article No.: P 17.47
 
PTL Turntable with Telescope Support, to be adapted between eccentricity 100 mm and inclination of the support grid by 15 ° in 4 directions,  for 2,5 min each, turned by 90 °each, including automatic control, according to e. g. EN 60529 / 1991 &14.2.2 Fig. 3:on request